Crystal size, a key character of lactose crystallization affecting microstructure, surface chemistry and reconstitution of milk powder.

Lactose crystallization during storage deteriorates reconstitution performance of milk powders, but the relationship between lactose crystallization and reconstitution is inexplicit. The objective of this study is to characterize crystalline lactose in the context of formulation and elucidate the complex relationship between lactose crystallization and powder functionality. Lactose in Skim Milk Powder (SMP), Whole Milk Powder (WMP) and Fat-Filled Milk Powder (FFMP) stored under 23 %, 53 % and 75 % Relative Humidity (RH) at 25  â„ƒ for four months was compared. Lactose, surface chemistry and microstructure of FFMP stored at 25 â„ƒ and 40 â„ƒ at 23 % to 75 % RH for four months were also analyzed and interpreted. At the same RH, FFMP crystallized in the same pattern as WMP. At 53 % RH, FFMP and WMP differentiated from SMP in terms of lactose morphology as well as the ratio between anhydrous α-lactose and anhydrous ß-lactose. Lactose remained amorphous at 23 % RH, crystallized predominantly to α/ß-lactose (1:4) at 40 to 58 % RH and to α-lactose monohydrate at 75 % RH. The crystallinity index was similar for all powders containing crystalline lactose. The estimated crystallite size increased from approx. 0.1 to 20 µm with increasing RH and temperature. When amorphous lactose crystallized into crystals below approx. 0.1 µm at 25 °C and 43 % RH, the microstructure and surface lipid were comparable to that of the reference powder. This powder reconstituted into a stable suspension system comparable to that of reference (well performing) powders. These results demonstrate that crystallite size is the key property linking lactose crystallization and reconstitution. Our finding thus indicates limiting crystallite size is important for maintaining desired product quality.

Batch-wise versus continuous dough mixing of Danish butter cookies. A near infrared hyperspectral imaging study.

The Danish buttered cookie is a famous confectionery product. Its success makes manufacturing of the large volumes required challenging, introducing the need for different strategies to increase production while maintaining a high-quality standard. Two manufacturing lines used are batch-wise and continuous dough mixing. Despite the recipe being the same, the outcome of the two production types differs in texture and external appearance. While this does not infringe on the quality, changes in texture are observable. This manuscript analyses the physicochemical differences of the cookies after baking using Near Infrared hyperspectral imaging and Chemometrics. The study demonstrates that the changes in texture between batch and continuous production are mostly due to the difference in crystalline sucrose emerging in invisible spots on or near the surface of the cookies and a higher tendency of migrated butter-fat spots on the surface of the cookies for the continuous manufacturing procedure.

Randomized Trial of the Safety, Tolerability, Pharmacokinetics, and Pharmacodynamics of GSK2831781 in Healthy Japanese and White Participants.

This study investigated ethnic differences in the safety, tolerability, pharmacokinetics, and pharmacodynamics of GSK2831781, an anti-lymphocyte activation gene 3 (LAG3) monoclonal antibody, in healthy participants, and determined local tolerability and bioavailability following subcutaneous (SC) administration. A double-blind, randomized study of (A) single intravenous (IV) doses of GSK2831781 450 mg or placebo in Japanese and White participants; and (B) single SC doses of GSK2831781 150 or 450 mg, or placebo in White participants, was conducted. Blood samples for analyses were collected before dosing and over 112 days after dosing. GSK2831781 was well tolerated in Japanese and White participants after both IV and SC doses, with the adverse event profile in Japanese being consistent with other populations. There were no injection site adverse events. There was no evidence of differences in systemic exposure among Japanese and White participants. Systemic exposure did not vary with body weight. SC bioavailability was 76.5%, as estimated using population pharmacokinetic modeling. Full and sustained target engagement and evidence of LAG3+ cell depletion (≈53%-66%) were observed in both populations and after both administration routes. No evidence of reduced circulating regulatory T cells (CD4+ CD25+ CD127low FoxP3+ ) was observed. Following IV and SC administration, GSK2831781 depleted circulating LAG3+ T cells with no interethnic difference observed. There were no major impacts on circulating regulatory T cells.

High shear cooking extrusion to create fibrous mozzarella cheese from renneted and cultured curd.

To understand shearing on cheese curds during high shear extrusion, the controlable parameters of a twin-screw extruder were related with measured and calculated parameters that characterise the extrusion process effects on product properties. Curd properties were correlated with specific mechanical energy SME (23-390 kJ·kg-1), Texit (22-54 °C) and residence time RT (36-507 s); the wide experimental range studied provided new insights regarding extrusion of cheese curds. Longer and finer fibers were produced at low SME (23-27 kJ·kg-1), high Texit (50-54 °C) and short RT (55-60 s). Whereas extruded curds produced at high SME (166-390 kJ·kg-1), low Texit (22-23 °C) and long RT (371-396 s) tend to form a compact structure with less fiber formation. Temperature in the heating section, Th, and temperature of the cooling die, Tc, were found to determine critical curd phase transitions during extrusion, from viscoelastic solid to viscoelastic liquid and vice versa, that are important for the creation of fibrous cheese curd structures. Tc was the most important factor influencing SME, indicating the considerable contribution of the cooling process in increasing the shear forces. Curd composition and textural properties were significantly influenced by Th and Tc, showing that a higher Th enhances curd elasticity and reduces melt strength while a higher Tc induces lower water content and increases melt strength. We concluded that a variety of structured mozzarella products with customized properties can be produced by controlling the extrusion parameters.

A generalized image analytical algorithm for investigating tablet disintegration.

Commonly used methods for analyzing tablet disintegration are based on visual observations and can thus be user-dependent. To address this, a generally applicable image analytical algorithm has been developed for machine vision-based quantification of tablet disintegration. The algorithm has been tested with a conventional immediate release tablet, as well as model compacts disintegrating mainly through erosion, and finally, with a polymeric slow-release system. Despite differences in disintegration mechanisms between these compacts, the developed image analytical algorithm demonstrated its general applicability through quantifying the extent of disintegration without adaptation of image analytical parameters. The reproducibility of the approach was estimated with commercial tablets, and further, it could differentiate a range of different model compacts. The developed image analytical algorithm mimics the human decision-making processes and the current experience-based visual evaluation of disintegration time. In doing so the algorithmic method allows a user-independent approach for development of the optimal tablet formulation as well as gaining an understanding on how the selection of excipients and manufacturing processes ultimately influences tablet disintegration.

Clinical Pharmacokinetics of Daprodustat: Results of an Absorption, Distribution, and Excretion Study With Intravenous Microtracer and Concomitant Oral Doses for Bioavailability Determination.

Daprodustat, an oral hypoxia-inducible factor prolyl hydroxylase inhibitor, is being investigated for treatment of anemia in chronic kidney disease. This phase 1, nonrandomized, 2-period, crossover study in 6 healthy men characterized the absorption, distribution, and excretion of daprodustat when administered as oral and intravenous (IV) doses of unlabeled and radiolabeled daprodustat ([14 C]-GSK1278863). Tolerability and pharmacokinetic properties of daprodustat, and its 6 metabolites in the systemic circulation, were also evaluated. The mean recovery of radiolabeled daprodustat was ≈95% by day 5, with the majority in feces and minor renal elimination, indicating that daprodustat and metabolites are primarily eliminated via hepatobiliary and fecal routes. Approximately 40% of total circulating radioactivity in plasma following both IV and oral administration was daprodustat; thus, 60% was attributed to metabolites. It was estimated that ≈80% of daprodustat was absorbed across the gastrointestinal tract, and ≈18% cleared by hepatic extraction. Pharmacokinetics were essentially dose proportional, with moderate (≈66%) oral tablet bioavailability. Following IV administration, daprodustat plasma clearance (19.3 L/h) and volume of distribution (14.6 L) were low, suggesting low tissue distribution outside systemic circulation with likely low penetration into tissues. Daprodustat was generally well tolerated, with no deaths or serious or significant adverse events reported.

The Effect of α-, ß- and γ-Cyclodextrin on Wheat Dough and Bread Properties.

Cyclodextrins (CDs) are cyclic oligosaccharides that have found widespread application in numerous fields. CDs have revealed a number of various health benefits, making them potentially useful food supplements and nutraceuticals. In this study, the impact of α-, ß-, and γ-CD at different concentrations (up to 8% of the flour weight) on the wheat dough and bread properties were investigated. The impact on dough properties was assessed by alveograph analysis, and it was found that especially ß-CD affected the viscoelastic properties. This behavior correlates well with a direct interaction of the CDs with the proteins of the gluten network. The impact on bread volume and bread staling was also assessed. The bread volume was in general not significantly affected by the addition of up to 4% CD, except for 4% α-CD, which slightly increased the bread volume. Larger concentrations of CDs lead to decreasing bread volumes. Bread staling was investigated by texture analysis and low field nuclear magnetic resonance spectroscopy (LF-NMR) measurements, and no effect of the addition of CDs on the staling was observed. Up to 4% CD can, therefore, be added to wheat bread with only minor effects on the dough and bread properties.

Safety, tolerability and pharmacokinetics of emodepside, a potential novel treatment for onchocerciasis (river blindness), in healthy male subjects.

AIMS: Emodepside is an anthelmintic, originally developed for veterinary use. We investigated in healthy subjects the safety, and pharmacokinetics of a liquid service formulation (LSF) and immediate release (IR) tablet of emodepside in 2 randomised, parallel-group, placebo-controlled, Phase I studies. METHODS: Seventy-nine subjects in 10 cohorts in the single ascending dose study and 24 subjects in 3 ascending-dose cohorts in the multiple ascending dose study were enrolled. Emodepside as LSF was administered orally as single 1-40-mg doses and for 10 days as 5 or 10 mg once daily and 10-mg twice daily doses, respectively. Pharmacokinetics and safety were assessed up to 21 and 30 days, respectively. In addition, IR tablets containing 5 or 20 mg emodepside were tested in the single ascending dose study. RESULTS: Emodepside as LSF was rapidly absorbed under fasting conditions, with dose-proportional increase in plasma concentrations at doses from 1 to 40 mg. Terminal half-life was > 500 hours. In the fed state, emodepside was absorbed more slowly but overall plasma exposure was not significantly affected. Compared to the LSF, the rate and extent of absorption was significantly lower with the tablets. CONCLUSIONS: Overall, emodepside had acceptable safety and tolerability profiles, no major safety concerns, after single oral administration of 20 mg as LSF and after multiple oral administration over 10 days at 5 and 10 mg OD and at 10 mg twice daily. For further clinical trials, the development of a tablet formulation overcoming the limitations observed in the present study with the IR tablet formulation is considered.

Biochar catalyzed dechlorination - Which biochar properties matter?

Bone char catalyzed dechlorination of trichloroethylene (TCE) by green rust (iron(II)-iron(III) hydroxide, GR) has introduced a promising new reaction platform for degradation of chlorinated solvents. This study aimed to reveal whether a broader class of biochars are catalytically active for the dechlorination reaction and to identify which biochar properties are the most important for the catalytic activity. Biochars produced by pyrolysis of animal, plant, and sewage waste substrates at 950 °C were prepared for catalytic dechlorination of TCE by GR tested in batch experiments with 0.15 g L-1 biochar, 3.2 g L-1 GR, and ~ 20 µM TCE. The results showed that the biochar substrate significantly affects its catalytic activity, with the highest TCE reduction rate observed for bone and shrimp-based biochars (k ≥ 0.18 h-1), whereas no reactivity was seen for graphite and activated carbon references. Multivariate regression indicated that the biochar catalytic activity is controlled by multiple biochar properties - biochar surface area, TCE sorption, abundance of C-O groups, and pore size are the properties that impact the catalytic activity most. Derivation of biochar reactivity relationship for a broad spectrum of biochars provides a new approach for identifying proper biochar catalysts for pollutant degradation.

Pharmacodynamic Activity of the Novel Neurokinin-3 Receptor Antagonist SJX-653 in Healthy Men.

CONTEXT: SJX-653 is a novel neurokinin 3 receptor (NK3R) antagonist. The NK3 pathway is a central regulator of gonadotropin releasing hormone (GnRH) secretion and has also been implicated in the generation of hot flashes. Therefore, decreases of luteinizing hormone (LH) and testosterone in men serve as sensitive pharmacodynamic (PD) markers of central NK3 antagonism. OBJECTIVE: To characterize the safety, tolerability, pharmacokinetics, and pharmacodynamic activity of SJX-653 in healthy men. DESIGN: A randomized, placebo-controlled, double-blind, single ascending dose study. SETTING: Phase 1 unit. PATIENTS OR OTHER PARTICIPANTS: Seven cohorts of 6 healthy men 18-45 years of age (4:2 randomization to SJX-653/placebo per cohort). INTERVENTION(S): Single oral doses of 0.5-90 mg SJX-653. MAIN OUTCOME MEASURE(S): Safety assessments and serial pharmacokinetic (PK)/PD measurements. RESULTS: SJX-653 was well tolerated at all dose levels. Cmax and AUC0-24 increased in a dose-proportional manner. The terminal elimination half-life ranged between 9.8 and 12.5 hours independent of dose. A statistically significant, dose-dependent, reversible reduction of LH and testosterone was observed with near maximal effect after 15 mg and little to no effect at 4.5 mg. Maximal LH reduction was 70 ±â€…7% (mean ±â€…sd) at 6 hours after 30 mg SJX-653 versus 10 ±â€…43% for placebo (P = 0.0006); maximal T reduction was of 68 ±â€…5% at 8 hours after 60 mg SJX-653 versus 18 ±â€…11% for placebo (P < 0.0001). The plasma IC50 for LH reduction was 33 ng/mL. CONCLUSIONS: These data demonstrate clinical proof-of-mechanism for SJX-653 as a potent centrally-acting NK3R antagonist.

Estimating the structure of sarcoplasmic proteins extracted from pork tenderloin thawed by a high-voltage electrostatic field.

The application of high-voltage electrostatic field (HVEF) is a novel method of thawing. To determine if HVEF thawing could lead to sarcoplasmic proteins denaturation, and to provide a theoretical estimation of the structure of the sarcoplasmic proteins, pork tenderloin was thawed by traditional and HVEF methods. The results from protein solubility analysis, sodium dodecyl sulfate-polyacrylamide gel electrophoresis, Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimeter showed that HVEF thawing did not result in more protein denaturation than those thawed under air or running water. From the principal component analysis of FTIR raw spectra (1700-1600 cm-1, Amide I region), we observed some separations of samples with different thawing treatments. It was found that the proportions of α-helix (1650-1640 cm-1 spectral bands in the original data) could lead to the differences on the PC2 axis of score plots.

A Novel Inhaled Dry-Powder Formulation of Ribavirin Allows for Efficient Lung Delivery in Healthy Participants and Those with Chronic Obstructive Pulmonary Disease in a Phase 1 Study.

Chronic obstructive pulmonary disease (COPD) is an inflammatory lung condition, causing progressive decline in lung function leading to premature death. Acute exacerbations in COPD patients are predominantly associated with respiratory viruses. Ribavirin is a generic broad-spectrum antiviral agent that could be used for treatment of viral respiratory infections in COPD. Using the Particle Replication In Nonwetting Templates (PRINT) technology, which produces dry-powder particles of uniform shape and size, two new inhaled formulations of ribavirin (ribavirin-PRINT-CFI and ribavirin-PRINT-IP) were developed for efficient delivery to the lung and to minimize bystander exposure. Ribavirin-PRINT-CFI was well tolerated in healthy participants after single dosing and ribavirin-PRINT-IP was well tolerated in healthy and COPD participants after single and repeat dosing. Ribavirin-PRINT-CFI was replaced with ribavirin-PRINT-IP since the latter formulation was found to have improved physicochemical properties and it had a higher ratio of active drug to excipient per unit dose. Ribavirin concentrations were measured in lung epithelial lining fluid in both healthy and COPD participants and achieved target concentrations. Both formulations were rapidly absorbed with approximately dose proportional pharmacokinetics in plasma. Exposure to bystanders was negligible based on both the plasma and airborne ribavirin concentrations with the ribavirin-PRINT-IP formulation. Thus, ribavirin-PRINT-IP allowed for an efficient and convenient delivery of ribavirin to the lungs while minimizing systemic exposure. Further clinical investigations would be required to demonstrate ribavirin-PRINT-IP antiviral characteristics and impact on COPD viral-induced exacerbations. (The clinical trials discussed in this study have been registered at ClinicalTrials.gov under identifiers NCT03243760 and NCT03235726.).

Bone Char Mediated Dechlorination of Trichloroethylene by Green Rust.

Biochars function as electron transfer mediators and thus catalyze redox transformations of environmental pollutants. A previous study has shown that bone char (BC) has high catalytic activity for reduction of chlorinated ethylenes using layered Fe(II)-Fe(III) hydroxide (green rust) as reductant. In the present study, we studied the rate of trichloroethylene (TCE) reduction by green rust in the presence of BCs obtained at pyrolysis temperatures (PTs) from 450 to 1050 °C. The reactivity increased with PT, yielding a maximum pseudo-first-order rate constant (k) of 2.0 h-1 in the presence of BC pyrolyzed at 950 °C, while no reaction was seen for BC pyrolyzed at 450 °C. TCE sorption, specific surface area, extent of graphitization, carbon content, and aromaticity of the BCs also increased with PT. The electron-accepting capacity (EAC) of BC peaked at PT of 850 °C, and EAC was linearly correlated with the sum of concentrations of quinoid, quaternary N, and pyridine-N-oxide groups measured by XPS. Moreover, no TCE reduction was seen with graphene nanoparticles and graphitized carbon black, which have high degrees of graphitization but low EAC values. Further analyses showed that TCE reduction rates are well correlated with the EAC and the C/H ratio (proxy of electrical conductivity) of the BCs, strongly indicating that both electron-accepting functional groups and electron-conducting domains are crucial for the BC catalytic reactivity. The present study delineates conditions for designing redox-reactive biochars to be used for remediation of sites contaminated with chlorinated solvents.

Mid-Infrared Spectroscopy and Multivariate Analysis to Characterize Lactobacillus acidophilus Fermentation Processes.

The ever-growing competition among global biotech industries has led to high demands on production consistency. A statistical strategy of performance mapping for production optimization is therefore of great economic significance. Process analytical technology (PAT)-based sensors such as mid-infrared (MIR) spectroscopy enable process monitoring through substrate and by-product concentrations that directly represent the physiology of cells. Combined with multivariate statistics, MIR can be employed as a strategy for production performance mapping. This study describes the use of at-line spectroscopy, chemometric modeling, and post-process fitting to characterize Lactobacillus acidophilus fermentations. The emphasis is on alternative arrangements of the data and chemometric methods principle component analysis (PCA), multivariate curve resolution (MCR), and parallel factor analysis (PARAFAC). Two key parameters, rate constant and time of inflection, are extracted by post-process fitting on the outcomes of these different models. Their use as process performance descriptors to characterize the dynamics of substrate consumption, product formation and batch-to-batch variations is suggested. The unconstrained PCA primarily described biomass change, while the constrained models PARAFAC and MCR (both the augmented and individual-run configurations) could model the decrease in sugars and increase in lactic acid over time. It was concluded that MCR on individual batch data, followed by post-process fitting, is the preferred strategy for MIR spectroscopic monitoring.

Pharmacokinetics, Safety, and Tolerability of Multiple Doses of the Novel Oxytocin Receptor Antagonist Cligosiban in Development for Premature Ejaculation: Two Randomized Clinical Trials in Healthy Subjects.

BACKGROUND: Cligosiban (formerly IX-01) is a selective oxytocin receptor antagonist being developed for the treatment of premature ejaculation (PE). AIM: To investigate the plasma pharmacokinetics, safety, and tolerability of multiple oral doses of cligosiban in healthy male subjects; measure the amount of cligosiban in semen; and evaluate the potential of cligosiban to modulate CYP3A4. METHODS: Both studies were double-blind, placebo-controlled, parallel group designs involving sequential cohorts of 12 subjects each. Cligosiban dosage regimens were 100 mg, 400 mg, 800 mg, 1200 mg, 1,600 mg and 2,400 mg once daily for 10 days, administered as an aqueous dispersion. OUTCOMES: Blood samplings for cligosiban assays and safety assessments were performed throughout both studies. Semen was collected on day 9 at 2-4 hours postdose in study 1 only. Safety assessments included monitoring of adverse events, 12-lead electrocardiography, vital signs, and laboratory safety assessments. Urine samples for assessment of the 6ß-hydroxycortisol/cortisol ratio were collected before dosing on days 1 and 10. RESULTS: Cligosiban was rapidly absorbed after both single and multiple dosing, with maximum plasma concentrations typically measured at 1-3 hours postdose. The terminal half-life was approximately 12 hours, and steady state was achieved by day 3. Exposure increased approximately proportionally to dose after single dosing but less than proportionally after multiple dosing. Accumulation ratios were higher at the lower doses compared with higher doses (2.3 at 100 mg vs 1.1 at 2,400 mg). The mean amount of cligosiban in semen ranged from 0.22 to 2.01 µg over the 100-1,200 mg dose range (<0.0003% of the administered dose). There were no meaningful differences in the urinary 6ß-hydroxycortisol/cortisol ratio after multiple dosing with cligosiban. Cligosiban appeared to be well tolerated at all dose levels. CLINICAL IMPLICATIONS: Cligosiban is well tolerated following once-daily dosing over a wide dose range and does not appear to modulate CYP3A4 activity, suggesting limited potential for perpetrating drug-drug interactions via this mechanism. STRENGTHS & LIMITATIONS: The 2 controlled trials show good toleration and pharmacokinetic data, including negligible amounts of cligosiban in semen at doses expected to be therapeutic. Toleration of cligosiban will need to be confirmed in studies in patients with PE. CONCLUSION: Cligosiban showed a good safety profile at doses predicted to be therapeutic or supratherapeutic along with a pharmacokinetic profile appropriate for as-required or once-daily dosing. There was no evidence that cligosiban inhibited or induced CYP3A4 at doses up to 2,400 mg. Muirhead GJ, Osterloh IH, Whaley S, et al. Pharmacokinetics, Safety, and Tolerability of Multiple Doses of the Novel Oxytocin Receptor Antagonist Cligosiban in Development for Premature Ejaculation: Two Randomized Clinical Trials in Healthy Subjects. J Sex Med 2019;16:213-222.

A randomized trial comparing omega-3 fatty acid plasma levels after ingestion of emulsified and non-emulsified cod liver oil formulations.

OBJECTIVES: Emulsified formulations of omega-3 fatty acids may increase plasma concentrations of docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA) compared with non-emulsified formulations. The current study evaluated plasma concentrations of DHA + EPA as well as DHA and EPA individually following administration of emulsified vs non-emulsified cod liver oil formulations. METHODS: In this randomized, 2-period, crossover study (ClinicalTrials.gov NCT02428699), 47 healthy adults received single doses of an emulsified cod liver oil formulation and a non-emulsified cod liver oil formulation, each containing 10% cod liver oil plus 10% cod oil and closely matched DHA and EPA content. Blood samples were collected for 24 h after dosing to analyze DHA and EPA plasma concentrations using a validated methodology. DHA + EPA, DHA, and EPA pharmacokinetics were compared using an analysis of covariance model. The incremental area under the plasma concentration curve at 24 h (iAUC0-24 h) for DHA + EPA was the primary endpoint. RESULTS: DHA + EPA, DHA, and EPA plasma concentrations reached higher levels in plasma following administration of the emulsified vs non-emulsified formulation. The emulsified cod liver oil formulation produced iAUC0-24 h values for DHA + EPA, DHA, and EPA that were 1.66, 1.78, and 1.64 times higher, respectively, than the non-emulsified formulation; iAUC0-10 h values were 1.84, 1.96, and 1.79 times higher, respectively (all p < 0.01). Maximum concentrations of DHA + EPA, DHA, and EPA in plasma were significantly higher for the emulsified than the non-emulsified formulation (p < 0.001). CONCLUSIONS: DHA + EPA, DHA, and EPA plasma concentrations were significantly higher for the emulsified cod liver oil supplement vs the reference non-emulsified cod liver oil supplement.

Comparison of the effect of beclometasone/formoterol in asthma patients after methacholine-induced bronchoconstriction: A noninferiority study using metered dose vs. dry powder inhaler.

AIMS: To demonstrate the noninferiority of extrafine beclomethasone/formoterol fumarate (BDP/FF) dry powder inhaler (DPI) vs. extrafine BDP/FF pressurized metered dose inhaler (pMDI; Foster® 100/6 µg NEXThaler and pMDI, respectively) in the onset of reliever effect after methacholine induced bronchospasm in asthmatic patients, evaluated in terms of forced expiratory volume in 1 s (FEV1 ) at 5 min postdose. The DPI provides an alternative device option for patients who cannot use a pMDI properly during an acute asthma attack. METHODS: Sixty-five patients received one inhalation of BDP/FF DPI, BDP/FF pMDI or placebo after methacholine challenge, according to a double-blind, double-dummy, cross-over design. Lung function and Borg dyspnoea score were assessed up to 30 min postdose. RESULTS: FEV1 adjusted mean difference between BDP/FF DPI and BDP/FF pMDI at 5 min postdose was 2 ml (95% confidence interval: -0.060; 0.065). A similar result was observed at the other time points. Median time to 85% recovery in FEV1 was 8 min for BDP/FF DPI, 7.5 min for BDP/FF pMDI and 28 min for placebo (P = 0.554 DPI vs. pMDI). The Borg score improved after treatment with both BDP/FF DPI and pMDI and the effect was greater than after placebo. Median time to reach 50% recovery was 4.2 min for BDP/FF DPI, 4.0 min for BDP/FF pMDI and 10.0 min for placebo (P = 0.609 DPI vs. pMDI). CONCLUSIONS: Extrafine Foster® NEXThaler, a flow-independent DPI, is comparable to extrafine Foster® pMDI when administered as reliever therapy after methacholine challenge, thus supporting the maintenance and reliever therapy approach also with Foster® NEXThaler.

Pharmacokinetics, Safety, and Tolerability of Single Oral Doses of a Novel Oxytocin Receptor Antagonist-Cligosiban-in Development for Premature Ejaculation: Three Randomized Clinical Trials in Healthy Subjects.

INTRODUCTION: Cligosiban is a selective oxytocin receptor antagonist being developed for the treatment of premature ejaculation (PE). AIM: Three clinical studies investigated the pharmacokinetics (including effect of food and formulation), central penetration, safety, and tolerability of single oral doses of cligosiban in healthy subjects. METHODS: Study 1 was a double-blind, randomized, placebo-controlled, crossover design in 3 cohorts of 10 subjects each. Single doses of 0.3-2,400 mg cligosiban were administered as aqueous solutions or dispersions under fasting and fed (800 mg only) conditions. Studies 2 and 3 were open-label, randomized, crossover designs in 12 subjects each. Study 2 investigated 800 mg cligosiban administered as capsules and aqueous dispersion under fasting conditions, and capsules under fed conditions. Study 3 investigated 1,600 mg cligosiban administered as caplets and aqueous dispersion under fasting conditions, and caplets under fed conditions. MAIN OUTCOME MEASURES: Blood sampling for cligosiban assay and safety assessments were conducted throughout all studies. Cerebrospinal fluid (CSF) samples for cligosiban assay were collected in study 2. RESULTS: Cligosiban was rapidly absorbed under fasting conditions with peak concentrations generally occurring within 1-2 hours post-dose regardless of formulation. Maximum observed plasma concentration (Cmax) and area under the concentration time curve extrapolated to infinity (AUC0-∞) increased approximately dose-proportionally from 0.3-10 mg, but sub-proportionally from 30-2,400 mg. Cligosiban exposure was similar when administered as a dispersion or capsule (800 mg) under fasted conditions, but higher (87% increase) when administered as a caplet compared to the dispersion (1,600 mg). Food decreased the rate of absorption for all 3 formulations (median time to Cmax 3-6 hours compared to 1-2 hours fasted) but increased the extent of absorption (Cmax and AUC0-∞ increased by 75-149% and 33-49%, respectively). Cligosiban was detected in CSF at concentrations approximately 40% of unbound plasma concentrations. Cligosiban was well tolerated at all doses. CLINICAL IMPLICATIONS: Cligosiban is well tolerated over a wide dose range, and has the pharmacokinetic properties to be taken as required prior to sexual intercourse in men with PE and to antagonize the oxytocin receptor in the brain and spinal cord. STRENGTHS & LIMITATIONS: Three controlled trials show similar toleration and pharmacokinetic data. Cligosiban in CSF indicates its likely presence in all central nervous system tissue. These data need to be investigated and confirmed in multiple-dose studies prior to investigation in phase-II studies in men with PE. CONCLUSION: Cligosiban had a good safety/tolerability profile at doses predicted to be therapeutic or supra-therapeutic and a pharmacokinetic profile appropriate for "as-needed" dosing for men with PE. Osterloh IH, Muirhead GJ, Sultana S, et al. Pharmacokinetics, Safety, and Tolerability of Single Oral Doses of a Novel Oxytocin Receptor Antagonist-Cligosiban-in Development for Premature Ejaculation: Three Randomized Clinical Trials in Healthy Subjects. J Sex Med 2018;15:1547-1557.

Pharmacokinetics, Excretion, and Mass Balance of [14 C]-Batefenterol Following a Single Microtracer Intravenous Dose (Concomitant to an Inhaled Dose) or Oral Dose of Batefenterol in Healthy Men.

Inhaled batefenterol is an investigational bifunctional molecule for the treatment of chronic obstructive pulmonary disease. The excretion balance and pharmacokinetics of batefenterol using [14 C]-radiolabeled drug administered orally and as intravenous (IV) infusion were assessed. In this 2-period, open-label study, 6 healthy male subjects received a single IV microtracer 1-hour infusion of 4 µg [14 C]-batefenterol concomitant with inhaled nonradiolabeled batefenterol (1200 µg) followed by oral [14 C]-batefenterol (200 µg) in period 2 after a 14-day washout. The primary end points included: the area under the concentration-time curve from time zero to last time of quantifiable concentration (AUC0-t ); maximum observed concentration (Cmax ); and time of occurrence of maximum observed concentration. Following IV administration, the geometric mean AUC0-t of [14 C]-batefenterol was 121.9 pgEq • h/mL; maximum observed concentration and time of occurrence of maximum observed concentration were 92.7 pgEq/mL and 0.8 hours, respectively; absolute oral bioavailability was 0.012%. The mean AUC0-t ratio indicated that [14 C]-batefenterol accounted for 85% of total circulating radioactivity in the plasma initially and declined rapidly following IV administration, but only ∼0.2% of total circulating radioactivity following oral administration. Cumulative mean recovery of total radioactive [14 C]-batefenterol in urine and feces was 6.31% and 77.6%, respectively. Overall, batefenterol exhibited low systemic bioavailability after inhaled and oral administration, and high fecal excretion and low urinary excretion following IV and oral administration.

CoMiniGut-a small volume in vitro colon model for the screening of gut microbial fermentation processes.

Driven by the growing recognition of the influence of the gut microbiota (GM) on human health and disease, there is a rapidly increasing interest in understanding how dietary components, pharmaceuticals and pre- and probiotics influence GM. In vitro colon models represent an attractive tool for this purpose. With the dual objective of facilitating the investigation of rare and expensive compounds, as well as an increased throughput, we have developed a prototype in vitro parallel gut microbial fermentation screening tool with a working volume of only 5 ml consisting of five parallel reactor units that can be expanded with multiples of five to increase throughput. This allows e.g., the investigation of interpersonal variations in gut microbial dynamics and the acquisition of larger data sets with enhanced statistical inference. The functionality of the in vitro colon model, Copenhagen MiniGut (CoMiniGut) was first demonstrated in experiments with two common prebiotics using the oligosaccharide inulin and the disaccharide lactulose at 1% (w/v). We then investigated fermentation of the scarce and expensive human milk oligosaccharides (HMOs) 3-Fucosyllactose, 3-Sialyllactose, 6-Sialyllactose and the more common Fructooligosaccharide in fermentations with infant gut microbial communities. Investigations of microbial community composition dynamics in the CoMiniGut reactors by MiSeq-based 16S rRNA gene amplicon high throughput sequencing showed excellent experimental reproducibility and allowed us to extract significant differences in gut microbial composition after 24 h of fermentation for all investigated substrates and fecal donors. Furthermore, short chain fatty acids (SCFAs) were quantified for all treatments and donors. Fermentations with inulin and lactulose showed that inulin leads to a microbiota dominated by obligate anaerobes, with high relative abundance of Bacteroidetes, while the more easily fermented lactulose leads to higher relative abundance of Proteobacteria. The subsequent study on the influence of HMOs on two infant GM communities, revealed the strongest bifidogenic effect for 3'SL for both infants. Inter-individual differences of infant GM, especially with regards to the occurrence of Bacteroidetes and differences in bifidobacterial species composition, correlated with varying degrees of HMO utilization foremost of 6'SL and 3'FL, indicating species and strain related differences in HMO utilization which was also reflected in SCFAs concentrations, with 3'SL and 6'SL resulting in significantly higher butyrate production compared to 3'FL. In conclusion, the increased throughput of CoMiniGut strengthens experimental conclusions through elimination of statistical interferences originating from low number of repetitions. Its small working volume moreover allows the investigation of rare and expensive bioactives.